The Versatility of Polyelemental Perovskite Compositions
Michael Saliba a
a Adolphe Merkle Institute, University of Fribourg, CH-1700 Fribourg, Switzerland
nanoGe Perovskite Conferences
Proceedings of nanoGe International Conference on Perovskite Solar Cells, Photonics and Optoelectronics (NIPHO19)
International Conference on Perovskite Thin Film Photovoltaics
Jerusalem, Israel, 2019 February 24th - 27th
Organizers: Lioz Etgar and Kai Zhu
Invited Speaker, Michael Saliba, presentation 001
DOI: https://doi.org/10.29363/nanoge.nipho.2019.001
Publication date: 21st November 2018

Perovskites have emerged as low-cost, high efficiency photovoltaics with certified efficiencies of 22.1% approaching already established technologies. The perovskites used for solar cells have an ABX3 structure where the cation A is methylammonium (MA), formamidinium (FA), or cesium (Cs); the metal B is Pb or Sn; and the halide X is Cl, Br or I. Unfortunately, single-cation perovskites often suffer from phase, temperature or humidity instabilities. This is particularly noteworthy for CsPbX3 and FAPbX3 which are stable at room temperature as a photoinactive “yellow phase” instead of the more desired photoactive “black phase” that is only stable at higher temperatures. Moreover, apart from phase stability, operating perovskite solar cells (PSCs) at elevated temperatures (of 85 °C) is required for passing industrial norms.
Recently, double-cation perovskites (using MA, FA or Cs, FA) were shown to have a stable “black phase” at room temperature.(1,2) These perovskites also exhibit unexpected, novel properties. For example, Cs/FA mixtures supress halide segregation enabling band gaps for perovskite/silicon or perovskite/perovskite tandems.(3) In general, adding more components increases entropy that can stabilize unstable materials (such as the “yellow phase” of FAPbI3 that can be avoided using the also unstable CsPbI3). Here, we take the mixing approach further to investigate triple cation (with Cs, MA, FA) perovskites resulting in significantly improved reproducibality and stability.(4) We then use multiple cation engineering as a strategy to integrate the seemingly too small rubidium (Rb) (that never shows a black phase as a single-cation perovskite) to study novel multication perovskites.(5)
One composition containing Rb, Cs, MA and FA resulted in a stabilized efficiency of 21.6% and an electroluminescence of 3.8%. The Voc of 1.24 V at a band gap of 1.63 eV leads to a very small loss-in-potential of 0.39 V, one of the lowest measured on any PV material indicating the almost recombination-free nature of the novel compound. Polymer-coated cells maintained 95% of their initial performance at 85°C for 500 hours under full illumination and maximum power point tracking. This is a crucial step towards industrialisation of perovskite solar cells.

Lastly, to explore the theme of multicomponent perovskites further, molecular cations were revaluated using a globularity factor. With this, we calculated that ethylammonium (EA) has been misclassified as too large. Using the multication strategy, we studied an EA-containing compound that yielded an open-circuit voltage of 1.59 V, one of the highest to date. Moreover, using EA, we demonstrate a continuous fine-tuning for perovskites in the "green gap" which is highly relevant for lasers and display technology.

The last part elaborates on a roadmap on how to extend the multicatio to multicomponent engineering providing a series of new compounds that are highly relevant candidates for the coming years.(6)

(1) Jeon et al. Nature (2015)

(2) Lee et al. Advanced Energy Materials (2015)

(3) McMeekin et al. Science (2016)

(4) Saliba et al., Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy & Environmental Science (2016)

(5) Saliba et al., Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science (2016).

(6) Turren-Cruz et al. Methylammonium-free, high-performance and stable perovskite solar cells on a planar architecture Science (2018)

© Fundació Scito
We use our own and third party cookies for analysing and measuring usage of our website to improve our services. If you continue browsing, we consider accepting its use. You can check our Cookies Policy in which you will also find how to configure your web browser for the use of cookies. More info