Nanostructured photoelectrodes for solar energy conversion

Roland Marschall^a

^aPhysical Chemistry III, University of Bayreuth, 95447 Bayreuth, Germany

Proceedings of MATSUS Fall 2026 Conference (MATSUSFall26)

E5 From Materials Innovation to Sustainable Photo-Assisted Electrochemical Systems

Palma, Spain, 2026 October 26th - 30th

Organizers: Teresa Gatti and Isabella Poli

Invited Speaker, Roland Marschall, presentation 109
Publication date: 22nd July 2026

Efficient conversion and storage of solar energy are crucial steps in the establishment of a renewable and carbon neutral energy supply. Photoelectrochemical (PEC) water splitting is a promising energy conversion and storage technology, considered very promising to make use of the large amounts of sunlight that reach the surface of earth. It renders the direct conversion of light into chemical energy possible, e.g. solar fuels like hydrogen or ammonia. By the aid of nanostructuring, diffusion pathways can be drastically shortened in case of low charge carrier diffusion lengths.

In recent years, earth-abundant Fe-based materials like spinel ferrites have emerged as auspicious materials for PEC. They have the inherent ability to absorb a large part of the visible light spectrum with band gaps around 2 eV, while some of them being also very good electrocatalysts. In this presentation, the activity and stability of both pristine and hydrogen-treated ZnFe₂O₄ will be presented.[1] Using an illuminated scanning flow cell setup, we monitored the activity and dissolution rates of ZnFe₂O₄ under operando PEC conditions. It was found that at PEC water oxidation conditions, ZnFe₂O₄ does not degrade in basic pH. Moreover, thermally reduced ZnFe₂O₄ shows expected higher OER activity without compromising the stability compared to the pristine one.

Due to its high electric conductivity, beneficial hole diffusion length, and band gap of 2.7 eV suitable to absorb visible light, WO₃ is a well-understood photoanode for photoelectrochemical water splitting.[2,3] In this contribution, a study to unravel the influence of seed layers on the performance of hydrothermally-grown WO₃photonanodes will be presented.[4] Moreover, using a sol-gel synthesis method adapted from Hillard et al.,[5] we systematically investigated the influence of calcination temperature, film thickness, and porosity on the structural, optical, and electronic properties of WO₃ thin films,[6] reaching photocurrent exceeding 3.7 mA cm^-2.[7] Finally, the application of mesoporous WO₃ photoanodes for photoelectrochemical HMF oxidation will be presented.[8]

References:

[1] N. Cheng, L. Kanzler, Y. Jiang, A. Mingers, M. Weiss, C. Scheu, R. Marschall, S. Zhang, ACS Catal. 2024, 14, 10789–10795

[2] J. M. Berak, M. J. Sienko, J. Solid State Chem. 1970, 2, 109–133

[3] Z. F. Huang, J.J. Song, L. Pan, Y. Zhang, L. Wang, J.J. Zou, Adv. Mater. 2015, 27, 5309–5327

[4] M. Ade, L. Schumacher, R. Marschall, Sustain. Energy Fuels 2023, 7, 4332-4340

[5] S. Hilliard, G. Baldinozzi, D. Friedrich, S. Kressman, H. Strub, V. Artero, C. Laberty-Robert, Sust. Energy Fuels 2017, 1, 145–153

[6] L. M. Mayer, R. Marschall, ChemPhotoChem 2025, 9, e202500191

[7] F. von der Haar, J. P. Wölfel, M. Kuhn, J. Jungmann, E. M. Herzig, R. Marschall, Chem. Mater. 2026, 38, 3171-3188

[8] L. M. Mayer, I. Bauer, J. P. Wölfel, F. Hahn, R. Marschall, Carbon Future, https://doi.org/10.26599/CF.2026.9200078

nanoGe is a prestigious brand of successful science conferences that are developed along the year in different areas of the world since 2009. Our worldwide conferences cover cutting-edge materials topics like perovskite solar cells, photovoltaics, optoelectronics, solar fuel conversion, surface science, catalysis and two-dimensional materials, among many others.

MATSUS

Previously nanoGe Spring Meeting (NSM) and nanoGe Fall Meeting (NFM), MATSUS is a multiple symposia conference focused on a broad set of topics of advanced materials preparation, their fundamental properties, and their applications, in fields such as renewable energy, photovoltaics, lighting, semiconductor quantum dots, 2-D materials synthesis, charge carriers dynamics, microscopy and spectroscopy semiconductors fundamentals, etc.

International Conference on Hybrid and Organic Photovoltaics

International Conference on Hybrid and Organic Photovoltaics (HOPV) is celebrated yearly in May. The main topics are the development, function and modeling of materials and devices for hybrid and organic solar cells. The field is now dominated by perovskite solar cells but also other hybrid technologies, as organic solar cells, quantum dot solar cells, and dye-sensitized solar cells and their integration into devices for photoelectrochemical solar fuel production.

Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics

The main topics of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics (IPEROP) are discussed every year in Asia-Pacific for gathering the recent advances in the fields of material preparation, modeling and fabrication of perovskite and hybrid and organic materials. Photovoltaic devices are analyzed from fundamental physics and materials properties to a broad set of applications. The conference also covers the developments of perovskite optoelectronics, including light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.

International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics

The International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics (NIPHO) is the best place to hear the latest developments in perovskite solar cells as well as on recent advances in the fields of perovskite light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.